ServicesScreen Cleaning & Repair
Window Screen Cleaning & Repair in Edisto Beach
We take your screens down, wash the salt, pollen and grime out of the mesh by hand, and look closely at each frame. If one is torn, loose or won't seat, we find out why and fix that, so it fits properly when it goes back up.

Clean screens that fit the way they should
Screens catch everything the air carries before it reaches your glass. Salt film, pollen, sand and cobweb build up in the weave until the view looks hazy even after the windows are washed. A proper cleaning takes each screen out of its frame opening, washes both sides with a soft brush and mild soap, rinses it, and lets it dry before it goes back.
Repair is where looking first matters. A screen that rattles or falls out is not always a bad screen. Sometimes the spline has shrunk and let the mesh go slack. Sometimes a corner key has cracked, or the frame has bowed from being forced in. We check before we replace anything, so you pay for the fix the screen actually needs.
Many people book this alongside residential window cleaning or window track and sill cleaning, since clean glass behind a dirty screen still looks dull.
What the work includes
Careful removal and labeling
We take each screen down by hand and note which window it came from. Screens that look alike often differ by a quarter inch, and putting them back in the right openings keeps them from binding.
Hand washing both sides
A soft brush, mild soap and a gentle rinse lift salt, pollen and grime out of the mesh without stretching it. We skip pressure washers, which can push fiberglass mesh out of its spline.
Frame and mesh inspection
We look at every corner, the spline channel and the mesh itself. You hear what we found on each screen before any repair begins.
Rescreening and new spline
Torn or sagging mesh is pulled out and replaced, and old, brittle spline is swapped for fresh spline sized to the channel. The new mesh goes in evenly tensioned, without wrinkles or a bowed frame.
Small hardware fixes
Cracked corner keys, missing pull tabs and worn tension springs are common reasons a screen will not stay put. We replace these parts where the frame is still sound.
Refit and final check
Each screen goes back into its window and we check that it seats flush, with no gaps for insects to slip through.

Signs your screens need attention
- The view looks gray or hazy
- If the outside looks dim through a freshly washed window, the screen is holding a film of salt and dust. Near the coast this builds faster than most people expect.
- Mesh that sags or ripples
- Loose mesh usually means the spline has dried out and shrunk in the sun. It tends to tear soon after it starts to sag.
- Small holes or pulled corners
- A pinhole lets in no-see-ums and mosquitoes, and pulled corners mean the mesh is working free of the channel.
- A screen that rattles or falls out
- This can be a bent frame, a cracked corner or a missing spring. Each one has a different fix, which is why we look before we decide.
- White crust on the frame
- Chalky buildup on aluminum frames is oxidation from salt air. Cleaning it off early keeps the frame from pitting and helps it slide in and out easily.
How a screen visit runs
- 1
Start with a phone call
Give us a rough count of your screens, their general sizes, and any trouble you have spotted. A few questions from us help us bring the right mesh and spline on the day.
- 2
Removal and inspection
We take the screens down, label them, and look over each one. Before any repair, we walk you through what we found and what it will take.
- 3
Cleaning and repairs
Screens are washed by hand and set to dry. Repairs are done on site where we can, on a clean surface so new mesh stays flat and square.
- 4
Refit and walkthrough
We reinstall each screen in its own window, check the fit, and clear away the old mesh, spline and any debris we made.
What shapes the cost
Screen work is priced by what each screen needs, not a flat guess. A home with a dozen screens that only need washing costs far less than one with several needing new mesh. We explain the cost for each screen by phone or on site before we start the work.
- Number and size of screens
- More screens mean more handling time, and large patio or porch-window screens take longer to wash and rescreen than standard sizes.
- Cleaning only or repair
- A wash and refit is quicker than rescreening. Replacing spline and mesh adds material and time per screen.
- Mesh type
- Standard fiberglass is the most common choice. Heavier pet-resistant mesh and aluminum mesh cost more and take more care to install evenly.
- Frame condition and access
- Bent frames, cracked corners or screens on upper stories that are hard to reach add time. We tell you what we see before the price is set.
Questions about screen cleaning and repair
- How often should screens be cleaned near the beach?
- Most homes here do well with a screen cleaning once or twice a year. Salt and spring pollen are the main reasons to go more often. If your windows look dull soon after a wash, the screens are probably the cause.
- My screen has a tear. Is it repairable?
- In most cases, yes. A tear usually calls for fresh mesh and spline set into the frame you already have. A whole new frame only makes sense when the old one is badly bent or cracked and can no longer stay square, and we point out the damage so you can judge it for yourself.
- Why does my screen keep falling out?
- Usually it is a missing spring, a cracked corner key, or a frame that has bowed slightly. A screen cut a bit small can do it too. We check which one it is before changing anything, since the fix differs for each.
- Will cleaning damage older screens?
- We wash by hand with a soft brush and low water pressure, which is gentle on older mesh. If a screen is so brittle that cleaning would tear it, we tell you first and you decide whether to rescreen it.
- Can you do this the same visit as my windows?
- Yes. Many customers pair screen work with residential window cleaning or window track and sill cleaning. Doing them together means the screens go back onto clean glass and clean tracks.
Screens worth looking through again
Give us a rough count of your screens and describe anything that seems off, like sagging mesh or a frame that won't stay put. We will explain what each one probably needs and find a visit time that works for you.